Paint Half Face Respirator
Type: Half Face Respirator Set
Function: To adsorb/block harmful gases and dust
Material: High Quality Liquid Silicone, PE
Structural Design: Dual trapezoidal cartridges
Manufacture & Certificates
Produced by our own factory
Certifications: EN 140:1998, EN 143:2021, EN 14387:2021, ISO 9001
Service: OEM customization available, sample support
Applications：For work where fumes, vapors, or dust take over the air — spray painting, coating, bio-pharmaceutical and chemical processing, laboratory and pesticide operations, welding, paint mixing, and coal mining.
Description
Technical Parameters
Anhui Wankang Protective Products Co., Ltd. is one of the most reliable manufacturers and suppliers of paint half face respirator in China, featured by quality products and good price. Please rest assured to wholesale bulk advanced paint half face respirator from our factory. Contact us for customized service and pricelist.
Products Specification
|
Parameter |
Details |
|
Model |
WK6200 |
|
Product Name |
Half Face Respirator Set |
|
Brand |
WENAKALL |
|
Product Type |
Reusable half mask, dual cartridges |
|
Set Contents |
Mask body×1, Filter cartridges×2, Pre-filter cotton cover×2, Pre filter cotton×10 (Accessories are optional) |
|
Mask Material |
Silicone, PE |
|
Washable |
Yes, detachable & washable |
|
Color of Mask |
Gray, Pink, Blue, Black, Orange |
|
Protection Against |
Vapors, Gases & Dust (WK6001CN cartridges) |
|
Optional Accessories |
Cartridge B1; Cartridge E1; Cartridge K1; Composite Cartridge AEBK1 Filter Cotton 2097; Cartridge 60923; Comprehensive Cartridge 60926 Goggles; Earplugs |
|
Certificate |
Mask Standard: EN 140:1998 Cartridge Standard: EN 14387:2021 Filter cotton: EN 143:2021 TÜV Rheinland,ISO |
|
Filter Cotton Filtration Efficiency |
≥95%,FFP2 |
|
Package Information |
14×13×20 cm(Color Box)0.65 kg 58×42×55 cm(Carton Size)19kgs Units per Carton: 32 Sets/Carton |
Product Introduction
"Which filter do I need?" is the wrong first question. The right one is "what am I spraying?" - because the coating decides the hazard, and the hazard decides the cartridge for your paint half face respirator. A practical filter map, built around the WENAKALL WK6200.
Walk into any paint shop and you'll hear "what filter fits this mask?" It's the wrong question to start with. A filter doesn't fit a mask - it fits a hazard, and the hazard is set by whatever is in your spray gun. Ask "what am I spraying?" first, and the right cartridges for your paint half face respirator nearly pick themselves.
Every coating falls into a rough family, and each asks something different of your respirator. Think in two axes. First, vapor vs. particle: does your paint release solvent fumes (gas) or just fine spray mist (solid)? Second, how hot is the hazard: routine fumes you'll see all week, or a sensitizer you must never meet twice? The filter classes below use the EN system (EN 14387 gas filters A/B/E/K, EN 143 particulate P1–P3); NIOSH users can map: A≈OV, P3≈P100, A2P3≈OV/P100 combo.
The Filter Map
A reusable half face respirator for painting like the WK6200 takes different cartridges depending on the job:
|
What you're spraying |
Main hazard |
Cartridge for the WK6200 |
|
Water-based latex (wall, furniture primer) |
Mainly mist, low vapor |
Particulate P2–P3 |
|
Solvent enamel, nitro, alkyd (metal, wood) |
Organic vapor + mist |
Combined A1P2 / A2P3 (NIOSH: OV/P100) |
|
Two-pack epoxy (floors, primers) |
Vapor + hardener fumes |
Combined A2P3; A1P2 for short jobs |
|
Isocyanate clear coat, auto body |
Sensitizer - dangerous even at low levels |
A2P3 minimum; long or enclosed work needs full face + supplied air |
|
Pesticides, fungicides |
Particles + some organic vapor |
A1P2 combined |
The rule behind the table
Solvent means an A-class gas filter; isocyanate is never a "routine job." Solvent-based enamel and lacquer release organic vapors - toluene, xylene, ketones - which pass through particle-only filters like they're not there. On solvent jobs, a respirator for paint fumes must carry organic vapor cartridges. Two-pack auto clear coats release isocyanates - one of the few paint hazards that can sensitize you: the first exposure might do nothing, the second can end a career. Prolonged or enclosed work pushes you to a full facepiece with supplied air; a half mask is a stopgap, not a solution.
When to upgrade
A half face respirator for painting with a combined cartridge covers most of your week. Move up to a full facepiece or PAPR when: you're spraying isocyanates more than a few minutes a day; the job runs hours in an enclosed booth; you wear glasses and the mask keeps fogging (the seal is losing to your routine); or you've had one bad reaction to a hardener - never risk a second.
A real-world check
Before you grab a cartridge for your spray painting respirator, ask three questions - ten seconds that prevent a week of wrong breathing. One: "Does this paint say 'water-based' or does it contain solvents / hardeners?" Two: "Am I spraying, or just rolling?" Spraying aerosolizes everything. Three: "Is this a product I'll meet every day, or a one-off chemical?" If the answer is "solvents" and "spraying," you're holding an A2P3 and a proper seal on the WK6200 - not an N95 and hope.
The closing
The mask is just a shell. What protects you is the match between the coating and the cartridge - and that match starts with a question most painters skip: what exactly am I spraying today? Learn to read the can before you load the gun. And when you need a dependable paint half face respirator, the WENAKALL WK6200 gives you the seal, the comfort, and the cartridge range to match. The coating tells you everything - if you ask it first.
FAQ
Q: Can I use one cartridge for every paint?
A: No. Match the cartridge to the coating - a particle-only filter stops mist, not organic vapor.
Q: How often should I replace the cartridge?
A: On the manufacturer's rated hours and exposure time, not by smell. Replace when in doubt.
Q: Why A2P3 for isocyanate?
A: Isocyanates sensitize on repeat contact. A2P3 is the minimum; long or enclosed work needs full face + supplied air.
Q: Can I wear the same mask for spraying and sanding?
A: Yes - swap to the right cartridge for each job. Never sand with a gas-only filter.
Q: Can I wash the cartridges to reuse them?
A: Never. Water and soap ruin the adsorption media. Clean only the facepiece; seal cartridges in an airtight bag when not in use.
Q: Can I wear it with a beard? A half mask can't seal over facial hair.
A: You need a hood, a loose-fitting PAPR, or to shave at the sealing line.
Q: Is spraying outside without a respirator safe?
A: No. Ventilation dilutes but doesn't remove vapor at your breathing zone. On solvent jobs the respirator is non-negotiable - indoors and out.
Q: Do I need a fit test?
A: Yes - at least a negative-pressure seal check before each session, and a proper fit test where your workplace or standard requires one.
Hot Tags: paint half face respirator, China paint half face respirator manufacturers, suppliers, factory, Chemical Protection Respirator, Half Face Respirator Set, Pesticide Half Face Mask, Reusable Half Face Mask, Silicone Full Facepiece Respirator, Spraying Full Face Mask
Send Inquiry
